KERN KFB-TAM Instructions D'utilisation Et D'installation page 85

How to carry out an adjustment:

Confirm menu setting „noLin" by
Ensure that there are no objects on the weighing plate.

Wait for stability display, then press

The currently set adjustment weight will be displayed.

To change by using the navigation buttons (see chap. 2.1.1)
select the desired setting, the active digit is flashing.

Acknowledge with

Carefully place adjusting weight in the centre of the weighing
plate. Wait for stability display, then press

After the adjustment the balance will carry out a self-test.
Remove adjusting weight during selftest, balance will return
into weighing mode automatically.
An adjusting error or incorrect adjusting weight will be
indicated by the error message; repeat adjustment
procedure.
KFB/KFN-TAM-BA_IA-e-1832
.
.
.
.

17