Tolerance Check For Target Weight - KERN KFB-TAM Instructions D'utilisation Et D'installation

7.7.1

Tolerance check for target weight

Settings

Press and

Press until the display for entering the lower limit value
appears.

Press , the current setting will be displayed.

To enter the lower limit, e. g. 1000 Kg, press the navigation
keys (See chap. 2.1.1); the currently enabled digit will be
flashing.

Confirm input by

Press repeatedly until

Press , the current setting for the upper limit will be
displayed.

Press the navigation keys (See chap. 2.1.1) to enter the
upper limit, e.g. 1,100 kg; the currently enabled digit will be
flashing.

Confirm input by

Press repeatedly until

Press and the current setting for the acoustic signal will
be shown.

Select desired setting (no, ok, ng) by

Confirm input by
28
at the same time in weighing mode.
.
is displayed.
.
is displayed.
.
.

KFB/KFN-TAM-BA_IA-e-1832