KERN KFB-TAM Instructions D'utilisation Et D'installation page 116

Err 10 Communication error
Err 15 Gravitation error
Err 17 Taring range exceeded
Err 19 Zero point displaced
Fai l h /
Adjustment error
Fai l l
Err P
Printer error
Ba lo /
Battery very low
Lo ba
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.
48
• No data
• Range 0.9 ~ 1.0
• Reduce load
• Remedy:
Adjust / linearize
• Repeat adjustment.
• Check communication parameters
• Recharge battery
KFB/KFN-TAM-BA_IA-e-1832