Operation; Start-Up; Switching Off; Zeroing - KERN KFB-TAM Instructions D'utilisation Et D'installation

7 Operation

7.1 Start-up


Press and the instrument will carry out a self-test. As soon as the weight
display appears, the instrument will be ready to weigh.

7.2 Switching Off


Press and the display will disappear.

7.3 Zeroing

Resetting to zero corrects the influence of light soiling on the weighing plate. The unit
is equipped with an automatic zero setting function. Therefore the unit can be reset to
zero at any time as follows:

To unload the weighing system

Press and zero display as well as indicator

7.4 Simple weighing


Place goods to be weighed on balance.

Wait until stability display

Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding maximum load is indicated by the display of „----" and an audio
sound. Unload weighing system or reduce preload.
24
appears.
STABLE
will appear.
ZERO
KFB/KFN-TAM-BA_IA-e-1832