Parkside PSHL 2 A1 Consignes D'utilisation Et De Sécurité page 8

Safety instructions
Clean the filter, the surface of
„ z
the helmet and the solar cells
regularly.
Replace the protective visor if
„ z
scratches or damages appear.
The welding helmet does not
„ z
provide protection against impact.
Frequent use, cleaning or storage
„ z
can mean that the service life is
less than 6 years. Replace the
welding helmet immediately if
the viewing panel gets scratched
or the viewing panel is visibly
damaged in any other way.
ATTENTION! Materials that
come into contact with the wearer's
skin may cause allergic reactions in
people with sensitive skin.
ATTENTION! Eye protection
can represent a hazard for the
wearer if it is worn over normal
corrective glasses due to the impact
from high-speed particles.
8 GB/IE/NI
ATTENTION! If protection
against high-speed particles at
extreme temperatures is required, the
eye protection chosen must be
labelled with the letter T directly after
the letter for the impact intensity,
i. e. FT, BT or AT. If the letter for the
impact intensity is not followed by the
letter T, the eye protection may only
be used against high-speed particles
at room temperature.