6. EMERGENCY OPERATION
•
Use emergency operation only when the remote controller is defective or lost. In emergency
operation, the indoor unit can operate automatically for a while.
•
Press the emergency button. One bip sound indicates that the emergency operation is active.
On the first start and emergency operation starts, the unit operates automatically in the following
modes:
Room
Set temperature
temperature
Above 23°C
Below 23°C
It is impossible to change the settings of temperature and fan speed. It is also not possible to operate
in TIMER or DRY mode.
7. TEST OPERATION
Test operation button is the same as the emergency button.
•
Use the test operation button when the room temperature is inferior to 16°C.
•
Avoid using test operation in regular operation.
•
Press the test button for more than 5 seconds. 2 bip sounds indicate that test operation is
activated. Release your finger from the button.
•
In test operation, the fan motor of the indoor unit operates in high speed.
Timer
26°C
No
23°C
No
bip
Fan speed
AUTO
AUTO
Operation mode
COOL
HEAT
43