Publicité
•
When adjusting the flap by hand, stop the unit.
•
When humidity is high, condensation can occur. Adjust on the left or at the air outlet
if all vertical louvers are on the right.
•
Avoid keeping the horizontal flap on a downward position for a long time in COOL or
DRY mode. Condensation can occur.
When restart after a remote stop, the remote controller automatically memorizes the previous set
swing position.
4.2. SLEEP mode
Press SLEEP button
▪
Press again this button to cancel Sleep function.
Operation mode
In COOL, DRY mode
1 hours after SLEEP mode starts, temperature becomes 1°C higher than set temperature. After
another 1 hour, temperature rises by 1°C. The unit operates for 6 more hours then stops. Temperature
is higher than set temperature so that room temperature is not too low for your sleep.
In HEAT mode
1 hour after SLEEP mode starts, temperature becomes 2°C lower than set temperature. After another
1 hour, temperature decreases 2°C more. After 3 more hours, temperature rises by 1°C. The unit
operates for 3 more hours then stops. Temperature is lower than set temperature so that room
temperature is not too high for your sleep.
40
to activate Sleep function. The
SLEEP operation starts
1 hr
Rises 1°C
1 hr
Temperature setting
In COOL, DRY mode
Temp. setting
1 hr
Decreases 2°C
1 hr
SLEEP
operation starts
In HEAT mode
. icon is displayed on the screen.
SLEEP operation stops
Approx.6hrs
Rises 1°C
Unit stops
Unit stops
Decreases 2°C
3 hrs
3 hrs
Rises 1°C
SLEEP
operation stops
Publicité
