Publicité
4.4. Timer On (scheduled start)/ Timer Off (scheduled stop)
1.
Start the unit and select an operation mode.
2.
Press the TIMER ON
•
Press TIMER ON button «ON 0.5» appears on the screen, after 10 seconds the time display is
IMER ON button «ON 0.5» appears on the screen, after 10 seconds the time display is
blank.
blank.
•
•
Press TIMER OFF button «OFF 0.5» appears on the screen, after 10 seconds the time display
Press TIM
is blank.
3.
Select the desired TIMER mode (TIMER ON or TIMER OFF ). "ON"or "OFF" flashes.
4.
Press the TIMER ON / TIMER OFF buttons to set time.
Each time the button is pressed, setting time in the first 12 hours increases by 0.5 hour, and after 12
hours, setting time increases by 1 hour.
5.
Press CONFIRM/CANCEL to confirm timer setting.
After adjusting the time, the time ON or OFF button stops flashing.
Cancel timer setting.
Press CONFIRM/CANCEL button to cancel the timer setting.
•
After replacing batteries or a power failure happens, time setting should be reset.
•
According to the Time setting sequence of TIMER ON or TIMER OFF, either Start-
Stop or Stop-Start can be achieved.
4.5. Health operation
(This function is unavailable on some models).
Press the HEALTH button
Press the HEALTH button again to cancel Health function.
5. BOOST FUNCTION
(This function is unavailable on some models).
Select the Boost function to cool, heat or dehumidify fast.
Select the Quiel function to reduce the noise of the unit.
Press the BOOST/SILENCE
press, the remote controller changes as follows:
When operating in «BOOST», fan speed is high.
When operating in «QUIET», fan speed is low.
42
/ TIMER OFF
to activate Health mode. The
to choose between «BOOST» and «QUIET» functions. On each
BOOST/SILENCE
(BOOST)
buttons to change TIMER mode.
icon is displayed on the screen.
(Silence)
Publicité
