Publicité
Operation mode
AUTO
COOL
DRY
HEAT
FAN
4.1. Air flow direction adjustement
Up and down swing
For each press of the SWING button
•
COOL/DRY
•
HEAT
Left and right swing (this function is unavailable on some models).
For each press of swing button
Remote controller
When operating in AUTO mode, the indoor
unit automatically selects Cool or Heat mode
according to room temperature.
When Fan is set to AUTO, the indoor unit
automatically adjusts the fan speed according to
room temperature.
Cooling only units do not have displays and
functions related to heating.
In DRY mode, when room temperature becomes
lower than set temperature +2°C, the unit operates
intermittently at LOW speed regardless of FAN
setting.
In HEAT mode, warm air blows out after a short
period of the time due to cold-draft prevention
function.
When operating in FAN mode, the indoor unit does
not operate in COOL or HEAT mode but only in FAN
mode.
AUTO is not available in FAN mode. Temperature
setting is disabled.
When FAN is set to AUTO, the indoor unit
automatically adjusts the fan speed according to
room temperature.
In FAN mode, SLEEP operation is not available.
AIR
, the remote controller displays as follows:
Initial state
AIR
, remote controller displays as follows :
Note
39
Publicité
