Publicité
Les langues disponibles
Les langues disponibles
Clean all parts of the appliance with a soft cloth or sponge moistened with a neutral and deli-
cate detergent. Carefully dry everything after cleaning;
Only use clean water to moisten the cloth or sponge for cleaning;
Do no use abrasive detergents, such as, for example, abrasive powders, agents containing al-
cohol, bleach, diluents, etc. which could damage plastic parts, painted parts or components
made of stainless steel;
After cleaning, use a soft, dry cloth for drying the surfaces. Check that all the parts are perfectly
dry before restarting the appliance;
Clean the condenser, which is located above the cabinet and behind the control panel, at least
once a week. Before cleaning, close and protect the cabinet, then remove the dust that has
deposited on the front of the condenser with a vacuum cleaner and a brush;
Carefully clean the condenser filter with a vacuum cleaner and a brush, then finish the cleaning
by immersing the filter in warm water with an antibacterial detergent. Let the filter dry com-
pletely in a dry and ventilated place before putting it back on the condenser;
The work area surrounding the appliance must also be clean and free of dust. It is advisable to
clean the workstation, especially the appliance support surface, before using it, and at the end
of use/day.
6.3 Servicing
Periodic maintenance is essential to obtain and maintain the best performance and
safe operation of the appliance. The operator can perform the following maintenance
operations:
Check the appliance's general conditions;
Check that the appliance does not emit any unusual noises or smells;
Cleaning the appliance: follow the instructions in paragraph 6.2 - Cleaning the appliance;
Periodically check the condition of the power supply cable. Do not use the appliance if the cable
is damaged. If the cable is damaged, have it replaced by the dealer or by a qualified technician;
Clean the condenser and its filter (see paragraph 6.2 - Cleaning the appliance);
Checking the safety devices. At least once a day, before using the appliance, carry out a visual
inspection to verify the integrity of the safety devices and protections, if any. Also perform a
functional test of the safety devices and the start and stop elements of the appliance (by way
of example, check the correct operation of the safety micro switches, if any);
Verification of the labels and safety symbols integrity. At least once a week, carry out a visual
inspection to verify the integrity of the labels and safety symbols. In the event of illegibility or
detachment, request a copy of the labels and symbols from the dealer or qualified technical
assistance.
ATTENTION! In the event of malfunction, damage, breakage or failure of the
safety devices, immediately disconnect the appliance from the power supply and
do not use it. It is mandatory to contact the dealer to obtain qualified technical
assistance.
ATTENTION! Servicing and repair activities must only be carried out by qualified per-
sonnel, using genuine accessories and spare parts.
Trying to repair the appliance by yourself is strictly forbidden and would result in the
immediate cancellation of the warranty while it could also lead to the risk of injuries
TRANSLATION OF THE ITALIAN ORIGINAL INSTRUCTIONS
- 31 -
Publicité
