Sony STR-DA5300ES Mode D'emploi page 95

Selecting an operation screen
to operate the component
connected to the DIGITAL MEDIA
PORT adapter
You can select an operation screen using the
GUI menu, depending on the DIGITAL
MEDIA PORT adapter you want to use. For
some adapter, such as TDM-BT1 or TDM-
NW1, the operation screen is fixed and you
cannot change it on the GUI screen.
1
Press AMP.
If "GUI MODE" is not displayed in the
display window of the receiver, follow the
steps given in "7: Operating the receiver
using the GUI (Graphical User
Interface)" (page 41).
2
Press MENU repeatedly to
display the GUI menu on the TV
screen.
3
Press V/v repeatedly to select
"Music," then press
"DMPORT" appears beside "Music."
4
Press
The component connected to the
DIGITAL MEDIA PORT adapter is
recognized and "DMPORT" on the screen
will change to each component's name.
The category of the component connected
to DIGITAL MEDIA PORT adapter
appears on the screen.
Note
An icon which shows the component
recognized is displayed on the TV screen. If
the adapter connected cannot be recognized,
"DMPORT" is displayed on the TV screen.
5
Press OPTIONS to display
1
"Function List."
6
Press V/v to select "DMPORT
Control."
You can select the following modes in this
menu;
• System GUI
This mode is for the TDM-iP1 and
3,
TDM-NC1. The list of tracks will be
4,6
displayed on the GUI screen of the
receiver. You can select a track you want
and play back it on each GUI screen.
5
• Adapter GUI
This mode is for the TDM-iP1 and
TDM-NC1. The menu of the adapter
2
will be displayed on the TV screen.
• iPod
This mode can be selected only when
the TDM-iP1 is connected.
If "DMPORT Control" is not displayed,
see the operating instructions supplied
with component for details on operating
that component.
or b.
or b.
continued
95 GB