Sony STR-DA5300ES Mode D'emploi page 14

Name Function
X CLEAR Press to
– clear a mistake when you
– return to continuous
Press to select
>10
– track numbers over 10 of the
– channel numbers of the
Press to enter direct tuning
D.TUNING
mode (page 83, 88).
Y 2CH/ Press to select sound field
(page 62) or to switch the audio
A.DIRECT
of the selected input to analog
signal without any adjustment
(page 121).
Z A.F.D. Press to select sound field
(page 65).
Press to light up the button. It
wj SHIFT
changes the remote button
function to activate the buttons
with pink printing.
Press to enable the TV
wk TV
operation.
wl RM SET UP Press to set up the remote.
a)
See the table on page 126 for information on the
buttons that you can use to control each
component.
b)
The tactile dot is attached to these buttons (H,
PRESET+). Use as a mark of operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
14
GB
press the incorrect numeric
button.
playback, etc. of the satellite
tuner or DVD player.
VCR, satellite tuner, CD
player or MD deck.
Digital CATV terminal.
RM-AAU016
This remote can only be used to operate the
receiver. You can control the main functions of
the receiver with simple operations using this
remote.
Name Function
A ?/1 (on/
Press to turn a receiver on or off.
standby)
B 2CH/ Press to select sound field
(page 62).
A.DIRECT
A.F.D.
MOVIE
MUSIC
C SCREEN/ Press to switch the display
mode of the menu between
DSPL
SCREEN (to display the menu
CONTROL
on the TV screen) and DSPL (to
display the menu in the display
window).
D After pressing SCREEN/DSPL
CONTROL (3), press V/v/B/
b to select the menu item. Then
V/v/B/b
press to enter the selection.