Pit Boss PB3BPGG Guide D'assemblage page 4

3. INSTALLING THE SIDE SHELVES
Parts Required:
2 x Side Shelf (#6)
Installation:
• Install each Side Shelf into the side shelf brackets on either side of the
body frame.
NOTE: Insert the corner pins of the mounting side of the shelf into
the brackets at an upward angle, then tilt downward.
4. PLACING THE GREASE TRAY
Parts Required:
1 x Grease Tray (#7)
Installation:
• On the back of the unit, place the Grease Tray into the Grease Tray
brackets, as shown in the illustration.
Note: The Grease Tray has an aluminum foil lining for easy cleaning
after cooking. Check regularly and replace the aluminum foil liner if
necessary.
5. INSTALLING THE COOKING GRIDS
Parts Required:
2 x Cooking Grid A (#2)
1 x Cooking Grid B (#3)
Installation:
• Place the Cooking Grids, side by side, on the grid ledges inside the
Body of the grill as shown.
• The unit is now completely assembled.
Refer to Owner's Manual for Operating Instructions.
4
3
6
4
7
5
2
3
2
6