Publicité
Les langues disponibles
Les langues disponibles
Band shortening instruction for metal
straps
Band shortening can be accomplished by removing links.
Open the band clasp safety and open the clasp. The band
is held to the clasp by a spring bar. Image 1. compress
and remove the spring bar by using a pointed tool. Now
place the watch face down on a soft surface. Image 2.
The links that can be removed are marked with an arrow.
Image 3. Place the band in the band changing tool in
such a way that the pointed end of the tool points directly at
the metal rod. Turn the screw in the direction of the arrow
until the metal rod is pushed out a small distance. The rod
can now be pulled out (using pliers if necessary). The strap
can now be taken disassembled. Remove as many links as
necessary using this method. Reinsert the rod in the
opposite direction of the arrow and push it back into the
band. The strap and clasp can now be reassembled.
All manuals and user guides at all-guides.com
- 5 -
An instructional video is available for online viewing at the
following URL:
http://www.lidl.com/nou9nohN
...or simply scan the following QR code:
Cleaning instructions
Clean the wristwatch with a soft, dry and lint-free cloth. A
glasses cleaning cloth is ideal.
Replacement of battery (SR626SW)
Battery replacements must be performed by an expert to
avoid damaging the case or gaskets.
Water resistance
Water resistant up to 3 bar. The bar value specifies the
atmospheric overpressure which is applied during testing
(DIN 8310).
- 6 -
Publicité
