Preparing To Connect The Water - Gaggenau RB 492 Instructions D'installation

12. Pull the appliances together at the top with Water
pump pliers (A).
13. When the appliances have been completely pulled
together, insert the bar into the upper plates.
14. Pull the appliances together at the bottom with Water
pump pliers.
15. When the appliances have been completely pulled
together, insert the bar into the lower plates. Use a
tool to push the bar in all the way.
16. Remove the installation aids.
34

Preparing to connect the water

(only for appliances which require a water connection)
Note:
Turn off the main water tap to prevent damage caused
by leaking water.
1. Attach the water line to the shut-off valve according
to the instructions supplied by the manufacturer of
the ice maker installation kit.
2. Install the water line.
Always observe the indicated dimensions to prevent
damage to the water line when pushing in the
appliance.