13. Screw On The Lower Fixing Angle - Gaggenau RB 492 Instructions D'installation

8. Tighten the fixing anglescrews in order to fix the
depth adjustment.
9. Close the door and check the lateral adjustment.
Correct the adjustment by lightly banging on the
edge of the open door by hand.
10. Screw nuts onto the threaded rods of the adjusting
rail and tighten! This way, the lateral adjustment of
the door is fixed.

13. Screw on the lower fixing angle

The lateral adjustment of the door is fixed through the
lower fastening angles.
The number of the lower fastening angles depends on
the width and the design of the furniture door.
Screw on lower bracket. Pre-drill holes into the furniture
door!
1. Loosen screw.
2. Push bracket over the screw.
3. Check the lateral position of the door.
4. Screw in the wood screws.
5. Tighten the screws.
6. Insert the coverings via the fixing angle.
27