Side-By-Side Installation - Gaggenau RB 492 Instructions D'installation

Side-by-Side installation

If a Side-by-Side installation is intended, now connect the
two appliances together.
1. Unpack the Side-by-Side kit and check that no parts
are missing.
Keep ready the anti-tip brackets as an installation
aid.
2. Place the appliances next to each other in the
intended configuration.
32
3. Unscrewing the base panels.
Notes:
– Freezers are factory equipped with a sealing mat for
the Side-by-side installation.
Continues the work to step 6.
– Attach the mat always left standing appliance!
4. Stick sealing mat from the Side-by-Side kit around
the edge. Secure the sealing mat with the pins.
5. Place the water-absorbing stripes from the Side-by-
Side kit on the side wall and secure with self
adhesive tape.