Transport Of The Appliance; Installation Preparation; Special Installation - Gaggenau RB 492 Instructions D'installation

3.

Transport of the appliance

ã
WARNING
Be careful, otherwise people who are helping may
be injured or the appliance may be damaged.
The appliance is very heavy.
1
The appliance is 83 /
8
cannot be transported in an upright position,
the appliance can be transported horizontally.
Note:
Do not raise up the appliance via the side panels. Risk of
damage to the appliance!
When raising up the appliance, observe the required
minimum height at the installation location according to
the following table:
Raise up via
appliance rear
Minimum height
86"/2185 mm
Note:
Always use the appliance dolly from the rear side of the
appliance. Never push it in from the front under the
appliance. Risk of damage to the appliance.
!
1. Transport the appliance to a suitable installation
location with suitable means of transportation
(trolley, lifting truck or hand).
2. Secure the appliance during transportation to
prevent it from tipping.
" (2126 mm) tall. If the appliance
Do not raise up from
appliance side
Do not raise up the
appliance via the side
panels!
4.

Installation preparation

Unpack installation materials and accessories.
To simplify installation, the packages are identified with
labels A, B, C and D corresponding with the manual
sections.
5.

Special installation

The following symbol indicates that additional steps
need to be taken before proceeding to the next chapter.
Special installation steps are described after section D.
– Change over door hinge, see
"Changing over the door hinges".
– Side-by-Side installation, see "Side-
by-Side installation".
– Connecting the water, see "Preparing
to connect the water" and
„Connecting the water to the
appliance".
– Door limitation pin, see "Adjusting the
door opening angle".
13