Makita DFL300F Manuel D'instructions page 4

ENGLISH
(Original instructions)
1 Battery cartridge
2 Red part
3 Button
4 Switch trigger
5 Reversing switch lever
6 Lamp
7 LED indicator
8 Screw
9 Angle head
10 Ring
11 Scale
SPECIFICATIONS
Model
With battery
BH1427/
BL1415NA
Fastening torque
With battery
BL1430/BL1440
Square drive
No load speed (min
Dimensions
Net weight
Rated voltage
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
Intended use
The tool is intended for screwdriving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
4
All manuals and user guides at all-guides.com
Explanation of general view
12 Compression spring
13 Yellow line
14 Hole for adjusting grip
15 Adjusting grip
16 Socket
17 Hole
18 Pin
19 DFL300F with battery BH1427/
BL1415NA
20 Range of fastening capacity
21 Revolution angle (°)
Hard joint
Soft joint
Hard joint
Soft joint
–1
)
506 mm x 73 mm x 104 mm
CORDLESS SCREWDRIVER SAFETY
WARNINGS
1.
ENE033-1
2.
GEA010-1
3.
4.
5.
SAVE THESE INSTRUCTIONS.
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
22 Torque (N•m)
23 DFL300F with battery BL1430/
BL1440
24 DFL400F/DFL401F with battery
BH1427/BL1415NA
25 DFL400F/DFL401F with battery
BL1430/BL1440
DFL300F
16 – 30 N•m
16 – 30 N•m
16 – 30 N•m
16 – 27 N•m
9.5 mm
400
510 mm x 73 mm x 104 mm
1.9 kg
D.C. 14.4 V
Hold power tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
Hold the tool firmly.
Keep hands away from rotating parts.
Do not touch the bit
immediately after operation; they may be
extremely hot and could burn your skin.
WARNING:
DFL400F/DFL401F
25 – 40 N•m
25 – 40 N•m
25 – 40 N•m
25 – 38 N•m
9.5 mm
260
2.0 kg
GEB050-2
or the workpiece