Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
POWER SUPPLY
Mains operation
Check that the mains voltage on
the type plate (on the bottom of the
device) corresponds to your local
mains supply. If this is not the case,
contact your specialist dealer.
1
Plug the mains cable into the sockk -
et (230 V ~ , 50/60 Hz).
Caution:
The device is connected to the
7
mains with the power cord. Pull
out the power cord when you
want to completely disconnect
the device from the mains.
Unplug the mains plug to dis-
7
connect the device from the
mains. Make sure the power
plug is easily accessible during
operation and not hindered by
other objects.
Inserting back-up
batteries
During mains operation, the back-up
batteries ensure that stored settings
are not lost in the case of a power
failure or when the device is briefly
disconnected from the mains.
1
To open the battery compartment
cover on the back of the device,
press on the marked area, push
the cover forward and lift it up.
________________________________
2
Observe the polarity marked on
the base of the battery compart-
ment when inserting the batteries
(2 x 1.5 V LR 03/AM 4/AAA).
3
Insert the lid again and push it to
the right until it latches in place.
Notes:
Do not expose the batteries to
7
extreme heat, caused for exam-
ple by direct sunlight, heaters or
fire.
Take out the back-up batteries
7
when you know that the device
will not be used for a long pe-
riod of time. The manufacturer
accepts no liability for damage
caused by leaking batteries.
Environmental note:
Batteries, including those which
7
contain no heavy metal, should
not be disposed of with house-
hold waste. Please dispose of
used batteries in an environ-
mentally sound manner. Find
out about the legal regulations
which apply in your area.
ENGLISH 21
Publicité
