Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
SETTINGS
First installation
When the device is connected to the
mains for the first, time, an automatic
station search starts. Stations are
automatically saved to the presets.
At the end of the search a demo
program starts. To end the demo
program, press »ON/OFF«. The sta-
tion saved on preset position 1 can
be heard.
If the device receives a station that
transmits an RDS time signal, the time
and the week day are set automati-
cally, (RDS time synchronisation).
This process may last a few minutes.
If the device could not execute the
automatic station search as well as
the automatic time/week day setting
due to poor reception conditions, for
example, you have to make the set-
tings manually or select a different
station.
Tuning and storing
stations
A maximum of 20 stations can be
stored on the presets.
Automatic station search
1
Press »ON/OFF« to switch on the
device from standby mode.
– Display: the frequency band
and frequency, or station name.
22 ENGLISH
_________________________________________
2
Activate the station search by
&
pressing »
the frequency display changes
to rapid run-through forwards or
backwards.
– The search stops when a chan-
nel is found.
Manual station search
&
1
TUNING
Press »
several times to move the frequen-
cy up in steps.
– The frequency changes up or
down in 50 kHz steps.
Storing stations as presets
&
1
Press »
TUNING
the station you want to store.
2
Press »MEM/TIME« to activate
the memory function.
– Display: the preset displays
MEMORY
»00« and »
3
–« or
Press
»P
desired preset.
Note:
If stations are already stored on
7
the presets, they are overwritten
when new stations are stored.
4
To store the station press
»MEM/TIME« again.
MEMORY
– Display: »
example, »2«.
5
To store more stations, repeat
1
to 4.
steps
%
TUNING
« until
%
« briefly
%
« to select
« flash.
+« to select the
»P
« and, for
Publicité
