Dräger Interlock 5x00 Notice D'utilisation page 27

5.1 Breath test
This function provides the option of requesting a new breath alcohol test.
5.2 Service info
This function shows the date, the reason for the next service and the phone
number of the service centre.
5.3 Device info
5.3.1 Occupational times
This function displays the set timeframes in which a breath alcohol test can be
performed using the instrument. Outside of this timeframes, it is not possible to
carry out a breath alcohol test using the instrument.
5.3.2 Client info
This function shows information for client identification.
5.3.3 Handset info
This function displays the part number, the serial number and the software
version of the handset.
5.3.4 Control box info
This function displays the part number, the serial number and the software
version of the control unit.
5.3.5 Camera info
This function displays the part number, the serial number and the software
version of the optional camera.
Instructions for use |
Dräger Interlock
All manuals and user guides at all-guides.com
®
5x00/7x00
5.3.6 Cellular/GPS info
This function displays the part number, the serial number and the software
version of the optional GPRS or LTE module.
5.3.7 Standby times
This function can be used to set and display the wake-up time. This function can
be used to shorten the start-up time at temperatures below 0°C (32°F).
5.3.8 Date & Time
This function displays the date and time.
5.4 Unlocking the instrument
The unlock code can be used to start the vehicle by delivering a breath sample
in the event of aninstrument lockout (for example because of expiry of the
service period due to legal requirements), after entering a code number.
1. To obtain the code number, call the service phone number and have the
following information ready:
● serial number of the handset,
● date and time (hours and minutes) at which the code number has to be
entered.
The code number is accepted for a period of up to 15 minutes after
the specified time.
2. Choose and confirm the Unlock device option. The display shows _ _ _ _.
3. Select and confirm the desired first figure.
4. Afterwards set the next figure.
5. Repeat the procedure for all figures.
6. Select Confirm or Cancel:
● Pressing cancel will exit the menu.
● On confirmation, the instrument will request a breath alcohol test.
|
Menu
27