Prepare Measurement - Beurer medical BM 16 Mode D'emploi

Masquer les pouces Voir aussi pour BM 16:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
Icons in the display:
1. Date/Time Indicator
2. Classification of measurements
3. Memory Zones
4. Memory Sequence Number
5. Weak Battery Mark
6. Cardiac arrhythmia icon
7. Pulse Mark
8. Pulse Rate
9. Diastolic Pressure
10. Systolic Pressure
11. Problem shown on the display

4. Prepare measurement

Inserting battery
• Remove the battery cover from
the back of the monitor.
• Insert four AA 1.5 V alkaline
batteries. making absolutely
sure that you insert them with
the correct polarity as marked.
Never use rechargeable batter­
ies.
• Replace the battery cover carefully.
If the battery change
urement is no longer possible and you must replace all the bat­
teries. Once batteries have been removed from the device, the
time must be reset.
1
2
3
4
5
6
7
4 x 1.5 V AA (LR6)
is continuously illuminated, meas­
Battery disposal
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
10
points or electronics retailers. You are legally required to dis­
pose of the batteries.
9
• The codes below are printed on batteries
containing harmful substances:
8
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Setting date and time
It is vital to set date and time. Only in this way is it possible to
save and subsequently retrieve your measured values with the
11
right date and time.
Press the
key and
and
in turn to adjust the date, hour, minute and
firm the entry.
Time is shown in 12 hour format.
Operation with the mains part
You can also operate this device with a mains part.
When doing so, there must not be any batteries in the battery
compartment. The mains part can be obtained from specia­
list retailers or from the service address using order number
071.68.
• To prevent possible damage to the device, the blood pres­
sure monitor must only be used with the mains part descri­
bed here.
• Insert the mains part into the connection provided for this
purpose on the right­hand side of the blood pressure moni­
17
to adjust the month. Then press the
to con­

Publicité

Table des Matières
loading

Table des Matières