Accessories; Installation - Alpine S-A60M Mode D'emploi

ACCESSORIES

• Self-Tapping Screw (M4 × 20) ......................................4
und to
• Hexagon Wrench ..............................................................1
ing
s in
pment

INSTALLATION

y, and it
ordance
Due to the high power output of the
S-A60M/S-A32F/S-A55V considerable heat is
produced when the amplifier is in operation. For
this reason, the amplifier should be mounted in a
location which will allow for free circulation of air,
such as inside the trunk. For alternate installation
locations, please contact your authorized Alpine
dealer.
1. Using the amplifier as a template, mark the four
nit in
screw locations.
2. Make sure there are no objects behind the
e is
surface that may become damaged during
drilling.
3. Drill the screw holes.
anty,
4. Position the S-A60M/S-A32F/S-A55V over the
screw holes, and secure with four self-tapping
screws.
which
d States
r dealer
ge.
Self-Tapping Screws
M4 × 20 mm (× 4) (included)
Holes (× 4)
(e.g. S-A32F)
ALPINE S-A60M/S-A32F/S-A55V 68-35792Z59-A (EN/FR/ES)
EN
FR
ES
3
-EN