Using The Joystick - Vermeiren DX2 Mode D'emploi

Operating the seating functions (adjustment seat, backrest, legrests, ...).
Move the joystick forward to operate the seating function in one direction. Move the joystick
backwards to operate the seating function in the opposite direction.
The active seating function LED flashes while operating the actuator. If you move the joystick
further forward, the seating function moves faster.
Return to the driving mode
Available seating functions
The DX2 basic system can operate in 4 seating functions or 4 seating functions and one
combined function (ex. 2 footrests together).
Actuator Function LEDs

Using the Joystick

Moving the joystick will drive the electric wheelchair in that direction.
amount of joystick movement will determine the speed that the powerchair will
move in that direction.
Make sure that the joystick is in the neutral (central) position when pressing the
on/off button, otherwise the electronics will be locked. To take this block away
let go the joystick until he goes back in neutral position.
Press the '+' or the '-' on the drive profile selection button to return to the
driving mode.
The Driving mode returns to the drive profile that was selected before the
seating mode was activated.
9
Meaning
Seating Function 1 selected
Seating Function 2 selected
Seating Function 3 selected
Seating Function 4 selected
Seating Function 3 and 4 selected
DX2 Operator control
vD - 2013-04
The