Locking Your Operator Control; Sleep Mode - Vermeiren DX2 Mode D'emploi

Locking your operator control

It is possible to lock your operator control so that unauthorized people cannot turn your electric
wheelchair on.
To lock your wheelchair:
While the power is ON, press and hold the ON/OFF button for 4 seconds.
The display will turn off immediately. After 4 seconds all LED's and the Lock LED
turn on for 1 second to indicate that the DX system is now locked.
To unlock your wheelchair:
While your wheelchair is locked, press the ON/OFF button to turn your
wheelchair on.
The Lock LED will flash for 10 seconds to indicate that the DX system is locked.
Press the Horn button twice before the countdown is completed (approximately
10 seconds).
The current state-of-charge will then be displayed and the operator control may
be operated normally.
If the user does not press the Horn button twice before the countdown is complete, the
Horn will sound a short beep and your operator control will turn itself off.
You must complete these procedure completely otherwise your wheelchair will not drive
again.

Sleep mode

The DX System will go to sleep after a period of inactivity of a quarter.
When the DX System sleeps, it is partially turned off to reduce energy consumption.
To reactivate the DX system:
Press any button on the DX system or move the joystick. The DX system turns
on.
5
DX2 Operator control
vD - 2013-04