Switch The Light On/Off; Switch The Warning Light On/Off - Vermeiren DX2 Mode D'emploi

Switch the light on/off

To switch the light on and off, keep the button for the left-hand indicator (3) pressed for
longer than 3 seconds. When the light function is switched on its symbol will light up in the
status display.
or

Switch the warning light on/off

To switch the warning light on and off, keep the button for the right-hand indicator (4)
pressed for longer than 3 seconds. When the warning light function is switched on its symbol
will light up in the status display.
or
Select the light function using the field selection
button (9) and the display will show the light selection
menu.
To switch the flash function (left or right) on or off,
move the joystick in the appropriate direction left or
right.
To switch back to the driving program, select the
drive profile button (8) in drive mode.
Select the light function using the field selection
button (9) and the display will show the light
selection menu.
Push the joystick upwards to switch the light on or
off.
To switch back to the driving program, select the
drive profile button (8) in drive mode.
Select the light function using the field selection
button (9) and the display will show the light
selection menu.
Push the joystick downwards to switch the warning
light on or off.
To switch back to the driving program, select the
drive profile button (8) in drive mode.
11
DX2 Operator control
vD - 2013-04