Adjusting The Driving Speed; Using The Drive Profile Indicator; Attendant Control; Using The Horn - Vermeiren DX2 Mode D'emploi

Adjusting the Driving Speed

Using the drive profile indicator

Select a Drive Profile that suits your preference and environment. The currently selected Drive
profile is indicated with the speed indicator LED's.
LEDs

Attendant Control

When the attendant control is activated, the ACU LED will light up and remain
light until the attendant relinquishes control.
In these mode the DX joystick does not work and it is not possible to select a
different drive profile. All the other buttons works.

Using the horn

Press the horn button. The horn shall sound as long as the button is pressed.
The DX2 system without LCD screen support 5 drive
profiles. A drive profile is a specific drive setting (slow
or fast, indoors or outdoors) that your therapist or
dealer can adjust to suit your personal needs and
preference. You can select the active Drive Profile
with the Drive Profile Selection button.
Press '+' to increase the drive speed/profile.
Press '-' to decrease the drive speed/profile.
Meaning
Drive Profile 1.
Drive Profile 2.
Drive Profile 3
Drive Profile 4
Drive Profile 5
7
DX2 Operator control
vD - 2013-04