The Service Indicator Light; Using The Lights; Using The Seating Function Button - Vermeiren DX2 Mode D'emploi

The Service indicator light

The Service indicator LED is dedicated to displaying fault codes. For a list of
the fault codes refer to paragraph 2.
If the electric wheelchair has exceeded the drive time and needs maintenance,
the fault indicator LED turns on continously for 15 seconds every time the
system is turned on. Take your wheelchair to a qualified service center for
maintenance.

Using the lights

Headlights:
Left and Right indicator lights:
Hazard warning lights:

Using the seating function Button

Buttons
LEDs
Selecting the correct seat function (adjustment seat, backrest, legrests, ...).
Press '+' or move the joystick right to select the next seating function.
Press '-' or move the joystick left to select the previous seating function.
To turn the Headlights on, press the Headlight Button. The green
Headlight LED next to button will lit. Press the Headlight Button
again to turn the headlights off.
To indicate left or right turns, press the Left or Right Indicator Button
as required. The green activated Light Indicator LED will flash. Press
the Button again to turn the indicator off.
To turn the Hazard lights on, press the Hazard Button. The two
green Left and Right Indicator LEDs will both flash simultaneously.
Press the Hazard button again to turn the hazard function off.
When you have placed the DX system in the seating mode the
joystick does not drive the wheelchair, it only selects and operates
the seating functions.
Press the '+' or the '-' on the seat function button to activate the
seating mode. The seating mode starts with the seating function
that was last selected. The seat function LEDs indicate the
currently selected seating function.
8
DX2 Operator control
vD - 2013-04