Attendant Control; Using The Horn; The Service Indicator Light; Using The Lights - Vermeiren operator control Shark Mode D'emploi

1.6.

Attendant Control

When the attendant control is activated, the ACU LED will light up and remain
light until the attendant relinquishes control.
1.7.

Using the horn

Press the horn button. The horn shall sound as long as the button is pressed.
1.8.

The Service indicator light

The Service indicator LED is dedicated to displaying fault codes. For a list of the
of the fault codes refer to paragraph 3.
1.9.

Using the lights

Headlights:
To turn the Headlights on, press the Headlight Button. The green LED
beneath the keypad icon will light. Press the Headlight Button again
to turn the headlights off.
Type 3
Type 2
Left and Right indicator lights:
Hazard warning lights:
Type 3
Type 2
(only for type 2 and 3 operator control)
To indicate left or right turns, press the Left or Right Indicator Button
as required. The green LED beneath the activated Light Indicator
Button will flash. Press the Button again to turn the indicator off.
To turn the Hazard lights on, press the Hazard Button. The two
green LEDs beneath the Left and Right Indicator buttons will both
flash simultaneously. Press the Hazard button again
to turn the hazard function off.
6
Shark Operator control
vA - 2011-07