Alphacool Eisstation 40 DC-LT Mode D'emploi page 18

Eisstation 40 DC-LT-Reservoir
TUBING AND COMMISSIONING
• Close the inlets on the reservoir using the 3 screw plugs:
• Now connect the tubes to the inlet of the radiator (equivalent to IN) and the inlet of the
reservoir (equivalent to OUT):
• Then fill the Eisstation 40 DC-LT-Reservoir with a funnel through the upper fillport:
All manuals and user guides at all-guides.com
18
Alphacool International GmbH
Use the plug key
We only recommend clear coolants
from our own production (CKC or
Eiswasser Crystal - no UV!) or pure
distilled or osmosis filtered water.
After commissioning the pump for the
first time, the water level drops.
Therefore, liquid should be refilled
during use.