HumanTechnik signolux A-2659-0 Mode D'emploi page 12

Individual icon assignment
To display an icon of your choice on a receiver for the
personcall-pushbutton, proceed as follows:
a) Keep the function button of the according receiver
pressed. The event icons light up in sequence. Relea-
se the button when the desired icon is lit.
b) Press the pushbutton.
c) Wait for approx. 20 seconds and test the function.
Replacing the battery
In order to be able to insert the coin cell battery (type
CR 2032) you first have to open the battery com-
partment.
a) Remove the transparent front by lifting it off its clip
on one side of the housing (fig. 1 A). If necessary, use
a small flatsided screwdriver to assist.
(1)
B
A
b) Now it should be possible to unhook the front from
the other side of the housing for removal.
12 English