HumanTechnik signolux A-2659-0 Mode D'emploi page 11

Function
A »signolux« alerting system consists of at least one
transmitter (e.g. person call pushbutton) and a »sig-
nolux« receiver. Up to 8 transmitters can be assigned
to each event icon of the receivers.
If e.g. the doorbell pushbutton is pressed, a radio
signal (868,425 MHz radio frequency) is transmitted
to the »signolux« receiver. Depending on the receiver
type, the received signals are indicated with light,
sound or vibration.
Setup
The battery is already inserted in the device and the
pushbutton is immediately ready for operation.
Preset transmitter indication
Signolux devices can be used together immediately
and without prior pairing when delivered.
By default, the pushbutton will be indicated by recei-
ver devices with the event icon »Doorbell 2«.
This transmitter can be displayed with an event icon
of your own choice, this can be done as described in
the following chapter.
However, this causes the according receiver to lose
the preset transmitter indication and every transmitter
previously indicated on the receiver must then be
individually paired!
English 11