oventrop Regucor WH Notice D'installation Et D'utilisation page 30

Pressure loss chart
Flow chart "Regumat" DN 20
Pump characteristics
6.2 "Regumaq XH" fresh water station
The fresh water station "Regumaq XH" is a hydrauli-
cally and thermostatically controlled product group
with plate heat exchanger for the hygienic heating of
potable water according to the flow principle.
WARNING
The installation of a heated potable water system
must be carried out in accordance with the valid
standards, approved rules of technology and local
regulations
Especially when operating a circulation system,
the hygiene regulations according to the DWGW
work sheet W551 must be observed
30
All manuals and user guides at all-guides.com
A copper or nickel brazed stainless steel plate heat
exchanger is part of the fresh water station.
Please observe the document "Demands on pota-
ble water when using Oventrop fresh water and
dwelling stations" at www.oventrop.com.
The specifying engineer and the user of the system
are responsible to incorporate and evaluate sub-
stances and other factors in the water, which influ-
ence corrosion and the formation of calcium de-
posits.
·
Flow rate V [l/h]
Illustr. 24 Overall view "Regumaq XH"
Illustr. 25 Proportional flow controller
A Storage cylinder circuit - return
B Potable water entry - cold
NOTICE