MINN KOTA MAXXUM Mode D'emploi page 20

USING & ADJUSTING THE MOTOR
Transporting the Motor
1
a. Before transporting the boat over water or land, stow
the motor to determine where the Lower Unit rests
on the Mount.
NOTICE:
The correct positioning of the Lower Unit
will place it directly on the Motor Rest located on the
Bow-mount.
b. If the Lower Unit does not sit on the Motor Rest,
deploy the motor so the Depth Collar can be
loosened and the motor can be adjusted to allow it
to rest on the Motor Rest. Adjust the shaft and then
re-secure the Depth Collar.
CAUTION
The Lower Unit should be placed on the Motor Rest within
the Motor Rest Area every time the motor is transported. If
the Lower Unit is improperly placed, either above or below the
Motor Rest Area, damage to the Lower Unit or Shaft will occur
and the Shaft will be incorrectly captured on the Rest. Not
following the recommended placement for the Lower Unit will
cause damage to the product and void your product warranty.
20 | minnkotamotors.com
Motor Rest Motor Rest
Motor Rest Area Motor Rest Area
Motor Rest Motor Rest
©2020 Johnson Outdoors Marine Electronics, Inc.
Mount Mount