Operating Instructions Midwest Stylus
A
6607290 D3673.201.01.03.02
®
®
Plus / Midwest
Phoenix ™ /Pro
All manuals and user guides at all-guides.com
1. Remove the high-speed handpiece.
B
2. Unscrew the cap (B).
3. Remove the defective halogen lamp/LED (A).
4. Insert the new halogen lamp/LED. Ensure the proper position of the
contact surfaces.
NOTICE! Pressing on the lens can destroy the LED. Use the
C
assembly tool (C) to insert the LED.
5. Wipe the bulb of the halogen lamp with a clean cloth.
6. Unscrew the cap from the quick coupling.
7. Check the light function of the quick coupling.
If the LED does not light up:
➢ Remove the LED and re-insert it after rotating it 180° around its own
axis.
8 Maintenance
61