DENTAURUM SUS 3 Mode D'emploi page 17

Fig. 8 Additional activation with spacer ring.
Fig. 9 Additional activation with SUS³ turbo spring.
special crimping pliers (REF 003-710-00) or Weingart universal
pliers (REF 003-120-00) (fig. 8).
6.2. SUS³ distance springs. Alternatively, SUS³ distance springs
(REF 607-152-00) can be shortened as required and placed on
the SUS³ telescope rod.
6.3. SUS³ turbo spring. The SUS³ turbo spring, with an additional
force of approx. 2 N, is available if greater activation (spring
force) is required. The turbo spring is placed on the SUS³
telescope element so that the three closed coils are pointing
mesially towards the SUS³ telescope rod (fig. 9).
6.4. SUS³ pressure spring. The SUS³ pressure spring can replace/
supplement the spring that is integrated in the SUS³ telescope
element towards the end of the active treatment phase,
if necessary.
EN
17