PROPER FEEDING OF BANKNOTES
Banknotes need to be orderly and placed properly in the Hopper (#1). Please refer to below for
the two proper methods to properly place the banknotes into the bill counter hopper.
QUICK START GUIDE
1. Plug the power adapter into the back of the unit (#12) and the other end into an electrical
outlet.
2. Turn the power switch to the "ON" position (#9).
3. The machine will go through an automatic self-diagnostics test to ensure accurate bill
counting. The counting wheels in the bill counter will spin several times to ensure it is ready
for use. When the machine has completed its test run and "C$0" displays on the machine, it
is now ready for counting.
4. Place your banknotes into the hopper to immediately begin counting
Note: This bill counter is preset to Canadian Mixed Denomination setting and to detect
counterfeit or suspect banknotes.
RBC-EP1000-CA
-5-