Royal Sovereign RBC-EP1000-CA Manuel D'instructions page 12

Owner's Manual
ERROR CODE DISPLAY AND SOLUTIONS
The display may show some error codes when counting, which means there are some
problems with the machine. Refer to the chart below to solve the errors.
Reason
UV suspicious banknote
MG suspicious banknote
MG suspicious banknote
MG suspicious banknote
Chained note detected
Double note detected
Half note detected
Width different
Tilt feeding notes
Colour sensor iussue
Colour sensor or length sensor issue
UV sensor issue
Problem with code disc sensor
Left counting sensor issue
Right counting sensor issue
Feeding counting sensor issue
MG counting sensor issue
MG counting sensor issue
Stacker counting sensor issue
Colour counting sensor issue
Colour sensor need calibration
Solution
Remove the banknote from
the stacker. Press START to
continue.
Clean the sensor or replace sensor - if needed
Sensor may nned to be replaced
Clean the sensor or replace sensor - if
needed
-12-