Safety Recommendations - SKF TKBA 10 Mode D'emploi

• Always turn off the power of the drive machine before you
start working.
• Always read and follow the operating instructions.
• Never stare directly into the laser beam.
• Never aim the laser beam into another person's eyes.
• Opening the housing of the laser unit may result in hazardous light
exposure and void the warranty.
• Take care not to pinch your fingers when mounting the units on
the pulley.
• The equipment should not be used in areas where there is a risk
of explosion.
• Never expose the equipment to high humidity or direct contact
with water.
• Have all repair work performed by an SKF repair shop.
SKF TKBA 10 & 20

Safety recommendations

WARNING
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
P ≤ 1mW l = 635nm
5