Publicité
Les langues disponibles
Les langues disponibles
SWITCH OFF
If the stove cools down below a minimum temperature, then the stove will switch off. This switch
off can also occur if pre-heating is too slow.
7. Cleaning and Maintenance
CAUTION: Only work on the stove when the mains plug has been removed from the
socket.
During assembly do not drop any items (screws) etc. into the fuel container - they can
block the conveyor auger and damage the stove.
Your stove must be switched off and have cooled down before work is carried out.
Not cleaning this unit will cause it to burn poorly and will avoid your stove's
warranty.
The frequency with which your stove must be cleaned as well as the maintenance intervals
depends on the fuel you use. High moisture contents, ash, dust and chips can more than
double the necessary maintenance intervals. We would like to point out once again that you
should only use tested and recommended wooden pellets as a fuel.
69
Publicité
