Publicité
Les langues disponibles
Les langues disponibles
This parameter is used to increase or reduce the speed at which the hot air is
projected to the room where the equipment is located.
To confirm and move to the next parameter, just press the key
After passing P4, P5 will appear, which is related to the speed of the
extractor when the machine is cleaning and then P6 will appear, which is
related to the speed of the extractor in the ignition process.
Cleaning settings
This parameter configures how often the machine will carry out a previous
cleaning of the burner, that is, from "x" in "x" time the machine during a time
"y" will increase the extractor speed so that most part of the ash in the burner
jumps into the ash box.
ECO MODE
In this function you can choose which economic mode the stove will be
operating in.
If it is Eco1, as soon as the equipment reaches the selected temperature,
it switches off.
If it is Eco2, as soon as the equipment reaches the selected temperature,
it remains on, but operating at minimum power.
62
.
Publicité
