Publicité
Les langues disponibles
Les langues disponibles
During any of the phases mentioned above, you can press the on/off button and turn off the device
without any problem.
From the moment that the equipment ignites or is in the shutdown phase and there is still a flame
or brazier, it is forbidden to disconnect the equipment from the electrical current.
To turn off the equipment, just press the key
a beep) and then the following message will be shown on the display:
From this moment on, the equipment will stop putting pellets in the burner
and will keep the fans in operation until the stove is at a safe temperature (40
Cº).
As soon as this temperature is reached, the equipment switches off
completely, leaving the following message on the display:
Only from this moment on is the equipment properly switched off and then you
can disconnect the appliance from the electrical current.
Electric Current Failure
In the event of a power failure during the equipment operation, the flame will
continue to burn inside the chamber as long as there is fuel in the burner. As
!!ATTENTION!!
for 4 seconds (until you hear
56
Publicité
