Publicité
Les langues disponibles
Les langues disponibles
Code
Alarm code
Pre-alarm
Gas high temperature alarm pressing line
93
193
Pressure differential lower than that
94
194
95
195
Compressor start-up failed (uPC)
Time exceeding operational limits alarm
96
196
97
197
Super Heat low alarm (uPC)
98
198
99
199
Low intake temperature alarm (uPC)
200
300
EVD EVO alarm: Evotunes alarm (uPC)
201
301
EVD EVO regulation alarm (uPC)
EVD EVO system alarms probe errors alarm
202
302
203
303
No communication between inverter and
204
304
Inverter not compatible with the
205
305
compressor selected (uPC)
Delta P greater than the permit at start
206
306
207
307
ATTENTION: Please Note that the pre-alarms are automatic reset, while the alarms are manual rearmament.
The 3.9.0 software version has been introduced to reset the alarms via the ON/OFF remote contact if enabled. From on position, if it switches to off and returns to on within 5
seconds resets the alarms; The ON/OFF contact can be performed at maximum 3 reset every hour.
First you have to reset the alarms with "R" key.
In case of power failure the alarms are reset.
22/10 – 6343841_04
Causes
Control wiring
(uPC)
Control wiring
specified (uPC)
Control wiring
Control wiring
(uPC)
Control wiring
MOP alarm (uPC)
Control wiring
Control wiring
Control wiring
Control wiring
Control wiring
(uPC)
Reserved (uPC)
Control wiring
Control wiring
uPC. (uPC error)
Control wiring
Control wiring
up (uPC)
Low pressure limit
Discharged unit
Note
55
Publicité
