To access the electric heater menu, press the key in (Fig.14). Once the key has been pressed, you must insert the password to access the various menus; to access the user menu,

the password is 001. To modify the value of the passwords, use the arrow keys. When you have inserted the correct password, press the key in (Fig.14). The monitor will show

the index of the ELECTRIC HEATER parameter and a 3-character string that identifies it; the string will be displayed for one second, after which it is replaced by the value of the

parameter itself. To move on to the next parameter, use the arrow keys (Fig.15). To modify a parameter, just select it, press the key in (Fig.14), modify the assigned value using

the arrow keys in (Fig.15), and confirm the modification by pressing the key in (Fig.14) again.

PASSWORD = 001

Fig. 14

Fig. 15

WARNING The following parameters must only be modified by qualified personnel authorised to install the unit.

22/10 – 6343841_04