Changing the bulbs
m
WARNING
To avoid electrical shock which can cause death or
severe personal injury, disconnect power to appliance
before making repairs. After making repairs, reconnect
power.
Switch off the appliance with the POWER button
m
CAUTION
Never touch a halogen bulb with bare fingers.
When inserting a glass halogen bulb, always hold with
a soft cloth
We recommend that a service technician changes the bulb.
Interior light (upper climatic zone)
Halogen bulb type: 20 W/12 V/socket G4
Release the cover and remove from the clip.
Pull out the defective halogen bulb.
Insert a new halogen bulb. Touch the halogen bulb with
a soft cloth only.
m
O
!
m
Attach the cover and connect to the clip.
LED Presenter light (lower climatic zone)
A new LED is available from our Customer Service.
Release the LED by turn in clockwise direction.
Insert the new LED.
NOTE
21