Dreame H11 Manuel D'utilisation page 10

Care & Maintenance
EN
Clean the Roller Brush
1. Pull up the left handle of the roller
brush and take it out.
3. Wipe the dust from the dust intake with
a dry cloth or paper towel. Never rinse it
with water.
Warning: To reduce the risk of electric
shock or injury, do not rinse the roller
brush assembly with water!
14
* Clean it as needed, it is recommended to replace it
every 3 to 6 months.
2. Use the included cleaning brush to
remove hairs and debris that get stuck
in the roller brush and rinse it with
clean water. The roller brush must be
thoroughly dried before use.
4. After cleaning is completed, align the
right end of the roller brush with the
right slot on the vacuum and push the
left end into the left slot on the vacuum
until it clicks into place.
Care & Maintenance
Clean the Dirty Water Tank
* It is recommended to empty the dirty water tank after each use, and before and after
the self-cleaning function is enabled.
1. Press the dirty water tank release
button and pull it out as indicated.
3. Rinse the tank and tank cover with
clean water. Clean the inner wall of the
tank with the included cleaning brush.
2. Hold the tank with one hand and pull
up the tank cover with another hand to
pour out the dirty water.
Dirty Water Tank
Cover
4. After the cleaning is completed, close
the tank cover, snap the bottom of the
tank into the support position of the
vacuum, and gently push the tank until
you hear a click.
咔哒
Click
EN
15