PROPAIN TYEE 2021 Instructions De Montage page 80

// USER MANUAL
TASK/CHECK
Check the frame for damages and deformation.
→ There must be no damages.
Check whether all cables and hoses are in the cable clips and verify the tight fit of the clips.
→ All cables must fit firmly in the cable clips.
Check the tightening torques of the pivot points of the rear triangle and the shock mount.
→ You can find the torque values in the assembly instructions of your bike.
Check the suspension elements for damages.
→ There must be no damages.
Sit on the bike with all your cycling equipment (helmet, backpack, shoes, etc.) and take a normal riding position.
→ We recommend a SAG of 15% - 20% on the fork and 20% - 30% on the shock.
→ If necessary, change the air pressure of your suspension elements. If you have ordered a shock with steel spring you have already chosen a
spring rate corresponding to your weight.
Before your first ride Before each ride
X X
X
X
X X
X