Beko TS1 90020 Manuel D'utilisation page 10

1
For products with a
water dispenser;
Pressure for cold water
inlet shall be maximum
90 psi (6.2 bar). If your
water pressure exceeds
80 psi (5.5 bar), use a
pressure limiting valve
in your mains system. If
you do not know how
to check your water
pressure, ask for the
help of a professional
plumber.
If there is risk of water
hammer effect in your
installation, always
use a water hammer
prevention equipment
in your installation.
1
Child safety
9
EN
Consult Professional
plumbers is you are not
sure that there is no
water hammer effect in
your installation.
Do not install on the
hot water inlet. Take
precautions against
of the risk of freezing
of the hoses. Water
temperature operating
interval shall be 33°F
(0.6°C) minimum
and 100°F (38°C)
maximum.
Use only potable water.
If the door has a lock,
the key should be kept
away from reach of
children.
Children must be
supervised to prevent
them from tampering
with the product.