Power Fist 8181406 Manuel Du Propriétaire page 2

V 1.48
SPECIFICATIONS
Average air consumption: 4.0 CFM @ 90 PSI
Capacity: 1.6 mm
Punch diameter: 5 mm
Air inlet: 1/4" NPT
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. Failure to follow all
instructions may result in electric shock, fire and/or personal injury. Keep this manual for
the safety warnings and precautions, operating, inspection and maintenance instructions.
When using this tool, basic precautions should always be followed to reduce the risk of
personal injury and/or damage to the equipment. Note that when this manual refers to a
part number, it refers to the parts list included.
WORK AREA
1. Keep your work area clean and well lit. Cluttered and dark areas invite accidents.
2. Operate in a safe work environment. Do not use in damp or wet locations. Do not expose to rain. Do not
use in the presence of flammable gases or liquids.
3. Keep children, bystanders and visitors away from the work area. Distraction can cause you to lose
control. Do not let them handle tools, hoses or extension cords. No one should be in the work area if they are
not wearing suitable protective equipment.
4. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always
lock up tools and keep them out of reach of children.
PERSONAL SAFETY
1. Use eye, and ear protection. Always wear ANSI approved impact safety goggles, which must provide
both frontal and side protection. Protect your hands with suitable gloves. Wear a full face shield if your work
creates metal filings.
2. Do not over reach; keep proper footing and balance at all times. Proper footing and balance enables
better control of the tool in unexpected situations.
3. Dress properly, wear protective equipment. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Tie back long hair. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working.
4. Stay alert, watch what you are doing and use your common sense. Do not operate any machine or tool
when you are tired, under the influence of drugs, alcohol or medications.
5. Use clamps or other practical ways to secure and support the work piece to a stable platform. Holding
the work piece by hand or against your body is unstable and may lead to loss of control.
Air Operated
Punch/Flange Tool
For any technical questions, please call 1-800-665-8685
2 2 2
8181406